Medical surgical mouth mask

[Medical surgical mouth mask]

● Pack of 10 pieces

Whitelist

● Three-layer filtration

Outermost layer: non-woven fabric

Block droplets, dust, etc.

● Middle layer: meltblown cloth

Filter fine particles

Inner layer: non-woven fabric

Skin-friendly and comfortable

● For children

[Technical specifications]

● Product Name: Medical Surgical Mouth Mask

● Type and design: Flat (type with hanging ear); Flat (tied type)

● Structure: It consists of mask body, nose clip and mask straps. The body of the mouth mask is made of non-woven fabric, which is effective in isolating it by filtration.

[Product performance]

The appearance should be clean and intact, and the surface should not be damaged or stained. Once worn, the mouth mask should be able to cover the wearer's mouth, nose and chin. The mouth mask is equipped with a deformable nose clip. The length of the nose clip is not less than 8.0 cm. It is convenient to take out and carry. The breaking strength at the connection point of each mask tape and the mask body should not be less than 10N. Spray 2 ml of synthetic blood onto the mask at 16.0 kPa pressure and avoid penetration of the mouth mask. The bacterial filtration efficiency of the mouth mask should be not less than 95%, and the filtration efficiency of the mouth mask for non-oily particles should be not less than 30%. The pressure difference between the two sides of the mouth mask for gas exchange should not be greater than 49 Pa, and the mask material should be made of non-combustible materials. The mouth mask does not burn for more than 5 seconds after leaving the flame. Unsterilized mouth masks, the total number of bacterial colonies ≤ 100 CFU / g. Coliforms, Pseudomonas aeruginosa, Staphylococcus aureus, Streptococcus hemolyticus and fungi must not be detected.

[Scope]

It is suitable for the clinical medical officer to wear during non-invasive operations to cover the mouth, nose and jaw of the user and to provide a certain physical barrier and prevent the direct ingress of microorganisms, body fluids and particles.

[Usage method]

1. Before use, check that the packaging is intact and confirm the validity of the product.

2. Open the packaging and take out the mouth mask. The nose clip is on top with the colored side facing out. Carefully cover your mouth and nose with the mouth mask and minimize the distance between your face and mouth mask as much as possible. 3. Do not touch the mouth mask when using it. Wash your hands with detergents and disinfectants after touching the mouth mask you are using. 4. After the mouth mask is damp or contaminated with moisture, put on a new, clean and dry mouth mask.

[Contraindications]

Those who are allergic to nonwovens must prohibit its use.

[Notes, warnings and tips]

1. Use prohibited if the packaging is damaged.

2. The product should be used as soon as possible after opening.

3. This product is a disposable product and must not be reused.

4. After using the product, dispose of the product as medical waste.

[Storage]

Store in a dry and ventilated place. [Useful life] Two years.

[About company]

laboratory

Protective mask manufacturing workshop

http://www.en.huibode.com/